0
protector de cable
Model No: S1339

Cable protector

Quantity :
add to cart
Contact Now
  • Specification Code:S1339-01
  • Specification Description:Cable protector Size:1000*300*50mm Hole Size:30*30mm Weight:8.5kg
  • The protector cable ramp measures 1000*300*50mm.
  • Its hole size is 30*30mm.
  • One unit weighs 8.5kg.
  • A 1000mm length covers a 1m cable run.
  • The 300mm width is the drive-over face.
  • At 50mm thick, the ramp lifts a wheel 50mm.
  • The 30*30mm hole takes one cable.
  • The 8.5kg ramp stays flat on the ground.
  • An 8.5kg protector cable needs two hands to lift.
  • The 30*30mm hole sits under the 50mm top.
  • The protector cable covers 1000mm by 300mm of floor.
  • One protector cable unit spans 1000mm along a kerb.
  • Cable runs through the 30*30mm hole under the 50mm deck.
  • The 300mm width leaves room for a tyre to pass.
  • The 8.5kg body holds the ramp down at road speed.